Mold Star 15 - Slow
Press and move to zoom.
Mouse over image to zoom.

Mold Star 15 - Slow

Product Code:SOSMS15P

A platinum cured silicone, soft, tear resistant, which exhibits very low long term shrinkage. Molds made with Mold Star will last a long time in the mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured  rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Features relatively low viscosity and vacuum degassing is not required for most applications.  Note: Not intended for brush-on mold making.

 Although not usually necessary, a release agent (Ease Release 200) will make demolding easier. Adding Plat-Cat cure accelerator will also reduce demold time. The pot life and cure times can be extended using Slo-Jo cure retarder. Note: This product will not cure against surfaces containing sulfur, even when sealed.


Technical Data Sheet


Mixing Ratio: 1A:1B by Volume
Viscosity: 12 500 cps
Pot Life: 50 Minutes
Demold Time: 4 Hours
Shore A Hardness: 15A
Color: Green

Weight:
Pint: 2 lb
Gallon: 18 lb
5 Gallons: 90 lb

CAD $51.95
Bookmark and Share
  • Quantity Available: 15
Average Rating:
(Based on 1 vote(s))
Rate this product: