Press and move to zoom.
Mouse over image to zoom.


Product Code:SOSOOM25P

Silicone rubber which has very low viscosity for easy mixing and pouring. Cures at room temperature, with negligible shrinkage. Suitable for a variety of art-related and industrial applications including making molds for sculpture and  prototype reproduction, casting plaster, resins and wax. Although not usually necessary, a release agent (Ease Release 200) will make demolding easier when pouring into or over most surfaces. Note for novice: OOMOO silicones do not have great tear strength. They are good for making simple or two-pieces block molds. Mold Max are high-strength silicones. Vacuum degassing is not necessary.

Technical Data Sheet

Mixing Ratio: 1A:1B by Volume
Viscosity: 4 250 cps
Pot Life: 15 Minutes 
Demold Time: 75 Minutes
Shore A Hardness: 25A
Color: Light Blue

Pint: 2,8 lb
Gallon: 20,7 lb

CAD $66.95
  • Quantity Available: 0
Average Rating:
Rate this product: